Informational reference only. Not legal advice. Verify with the governing authority before you build.
Scenario · Florida

Run a valet operation in Florida

Exact run a valet operation compliance requirements for Florida: what is required, who is responsible, and the citations. Every figure traces to primary law.

Verified Jul 2026 Governed by: U.S. DOJ / U.S. Access Board (ADA)

Valet Parking Passenger Loading Zone Required

Parking facilities that provide valet parking services shall provide at least one passenger loading zone complying with Section 503.

209.4 U.S. Department of Justice / U.S. Access Board Verified Jul 2026

Passenger Loading Zones General Compliance

Where provided, passenger loading zones shall comply with Section 209.2; at least one passenger loading zone complying with 503 in every continuous 100 linear feet (30 m) of loading zone space, or fraction thereof.

209.2.1 U.S. Department of Justice / U.S. Access Board Verified Jul 2026

Vehicle Pull-Up Space Dimensions

Passenger loading zones shall provide a vehicular pull-up space 96 inches (2440 mm) wide minimum and 20 feet (6100 mm) long minimum.

503.2 U.S. Department of Justice / U.S. Access Board Verified Jul 2026

Access Aisle Adjacent to Pull-Up Space

Passenger loading zones shall provide access aisles adjacent to the vehicle pull-up space. Access aisles shall adjoin an accessible route and shall not overlap the vehicular way.

503.3 U.S. Department of Justice / U.S. Access Board Verified Jul 2026

Access Aisle Minimum Width

Access aisles serving vehicle pull-up spaces shall be 60 inches (1525 mm) wide minimum.

503.3.1 U.S. Department of Justice / U.S. Access Board Verified Jul 2026

Access Aisle Length

Access aisles shall extend the full length of the vehicle pull-up spaces they serve.

503.3.2 U.S. Department of Justice / U.S. Access Board Verified Jul 2026

Access Aisle Marking

Access aisles shall be marked so as to discourage parking in them.

503.3.3 U.S. Department of Justice / U.S. Access Board Verified Jul 2026

Floor and Ground Surfaces / Level

Vehicle pull-up spaces and access aisles serving them shall comply with 302. Access aisles shall be at the same level as the vehicle pull-up space they serve. Changes in level are not permitted, except slopes not steeper than 1:48 shall be permitted.

503.4 U.S. Department of Justice / U.S. Access Board Verified Jul 2026

Vertical Clearance for Loading Zone and Route

Vehicle pull-up spaces, access aisles serving them, and a vehicular route from an entrance to the passenger loading zone, and from the passenger loading zone to a vehicular exit shall provide a vertical clearance of 114 inches (2895 mm) minimum.

503.5 U.S. Department of Justice / U.S. Access Board Verified Jul 2026

Mechanical Access Parking Garages Loading Zone

Mechanical access parking garages shall provide at least one passenger loading zone complying with 503 at vehicle drop-off and vehicle pick-up areas.

209.5 U.S. Department of Justice / U.S. Access Board Verified Jul 2026

Get a quote for this job

Send us the gear for run a valet operation in Florida and we reply with pricing. No account needed.

Gear for this job (set the quantities you need)

Sources

  1. 2010 ADA Standards for Accessible Design - Sec. 209 (Parking Spaces / 209.4 Valet Parking) & Sec. 503 (Passenger Loading Zones) (209.4)
  2. 2010 ADA Standards for Accessible Design - Sec. 209 (Parking Spaces / 209.4 Valet Parking) & Sec. 503 (Passenger Loading Zones) (209.2.1)
  3. 2010 ADA Standards for Accessible Design - Sec. 209 (Parking Spaces / 209.4 Valet Parking) & Sec. 503 (Passenger Loading Zones) (503.2)
  4. 2010 ADA Standards for Accessible Design - Sec. 209 (Parking Spaces / 209.4 Valet Parking) & Sec. 503 (Passenger Loading Zones) (503.3)
  5. 2010 ADA Standards for Accessible Design - Sec. 209 (Parking Spaces / 209.4 Valet Parking) & Sec. 503 (Passenger Loading Zones) (503.3.1)
  6. 2010 ADA Standards for Accessible Design - Sec. 209 (Parking Spaces / 209.4 Valet Parking) & Sec. 503 (Passenger Loading Zones) (503.3.2)
  7. 2010 ADA Standards for Accessible Design - Sec. 209 (Parking Spaces / 209.4 Valet Parking) & Sec. 503 (Passenger Loading Zones) (503.3.3)
  8. 2010 ADA Standards for Accessible Design - Sec. 209 (Parking Spaces / 209.4 Valet Parking) & Sec. 503 (Passenger Loading Zones) (503.4)
  9. 2010 ADA Standards for Accessible Design - Sec. 209 (Parking Spaces / 209.4 Valet Parking) & Sec. 503 (Passenger Loading Zones) (503.5)
  10. 2010 ADA Standards for Accessible Design - Sec. 209 (Parking Spaces / 209.4 Valet Parking) & Sec. 503 (Passenger Loading Zones) (209.5)

Informational only, not legal advice. Verify with your local building department and the current standards before you build.

Last verified Jul 2026